People who want to use the full utility potential of their ATV/UTV.
They are made in Finland at our factory located in Toivala.
We have our own, experienced in-house customer service. We always respond within two working days, but usually much faster.
We have been making ATV accessories since 2013.
Rammy machines have a 2-year warranty. Wearable parts like blades and belts do not include in warranty. Engines have their own 2-year warranty, which is handled by Briggs & Stratton.
An ATV/UTV must be 4×4 and have a winch. The ATV/UTV must also have a mounting kit to mount the Rammy to it (= snow plow mid mount or in some cases, snow plow front mount. For example KFI, Iron Baltic, Kimpex or Bronco.
Snowblower 120/140/155 ATV/UTV EC/PRO, Plow W165 ATV PRO and Flail mower 120 ATV are also available as front-mounted models (for front mounting kit). We recommend front-mounted models for UTV use only (excluding Plow W165 ATV PRO).
We always recommend a center mounting kit for ATVs. Front mounting kits better suit UTVs, because UTVs tend to have a longer wheelbase.
Center mounting is slower to mount but more robust/stable.
Front mounting is faster to mount and gives more ground clearance.
If you have a Can-Am Promount or Kimpex Click N Go center mounting kit.
Also, some front mounting kits require locking hooks to function.
Flail mower 120 ATV = for grass, hay, saplings, small bushes and trees.
Lawn mower 120 ATV PRO = large lawn / grassy areas.
Brush cutter 120 ATV PRO = bigger bushes, trees, etc.
PRO has a 420 cc winter engine and EC has a 306 cc winter engine. Otherwise they are the same.
The 420 cc has more torque, so it handles thicker snow better than the 306 cc, but it weighs about 10 kg more.
The width. The number corresponds to the snowblower’s total width in cm. The main frame is the same for all of the snowblowers (120 cm), but it is widened with wings. The wings can also be purchased separately afterwards. 120 is suitable for most ATVs, 140 is for ATVs with tracks or if extra width is needed, and 155 is for UTVs. If you have a winding road to clean, the 140 and 155 scoop snow from the inner curve.
They are easier to maintain and the weight/dimensions are smaller compared to a traditional 2-stage snowblower. Every extra kilogram of weight on an ATV/UTV lowers its maneuverability. Rammy is designed so that the effect is as small as possible, and MDS is one of the keys to this. We have purely focused on ATV accessories since 2013!
The MDS-system (Minimum Distance Space) is a technology developed by Rammy that utilizes the power generated by the Snowblower’s engine as efficiently as possible to throw the snow.
The technology is based on a tight snow auger housing, which achieves low bypass flow and low internal snow circulation.
To simplify, this refers to placing the auger as close to the frame as possible to prevent snow from flowing past and thus losing power. Rammy Snowblowers are designed so precisely that this gap is only a few millimeters
Visit each product page to see recommended retail prices.
Your local Rammy dealer can assist you with product price inquiries.
In the USA see here.
From a local Rammy dealer, via email, or shop through our online store.
In USA via disributor and their dealers.
Spare part numbers can be found in the user manual delivered with Rammy.
Briggs & Stratton handles that side. See your closest Briggs & Stratton dealer.
5w-40 full synthetic.
1,0L for 306cc (EC)
1,1L for 420cc (PRO)
Hammer blades are optional blades, providing a smoother cutting result if a Flail mower is used in gardens or yards.
As standard, the Flail mower 120 ATV has Y-blades, which are good all-around multipurpose blades.
Optional accessory for Brush cutter 120 ATV PRO.
Turns a Brush cutter into a Lawn mower 120 ATV PRO. Changing takes about 1 hour.
Optional accessory for Lawn mower 120 ATV PRO.
Turns a Lawn mower into a Brush cutter 120 ATV PRO. Changing takes about 1 hour.
The maximum working angle for Briggs & Stratton engines on Rammy machines is 25 degrees.
An ATVs front suspension swings down about 2-15 cm when Rammy is lifted up with a winch.
Depending on an ATVs brand, model, model year, suspension, wheelbase, etc. You can test your ATVs suspension by leaning against the front of the ATV.
If it feels like you can put spring stiffener rubbers on the coil springs, add a counter weight on the back of the ATV (for example, a cargo box and something heavy in it) and increase tyre pressure, etc. And make sure Rammy is mounted as close as possible to the front of the ATV.
There is no key. Simply switch “ON” from the remote control before starting.
Please contact Rammy sales by email: rammy@rammy.fi
Rammy machines are mounted on a EUR-pallet and covered with a cardboard box.
The total dimensions are 120 cm * 80 cm * 100 cm. 0,96cbm.
In the EU, shipping takes about 7-10 days.
See delivery note of your order.
Optional accessories. They halve the lifting speed of the winch, making it more comfortable to use.
Choose 74131282 if you have a rope or steel cable in your winch.
Choose 74131281 if you use a strap instead rope/cable in your winch.
We have had customers who have mounted, for example, our Snowblower, on a small tractor, Skid steer, Kei truck, small excavator etc.
However, we don’t have ready made mounts for that and we don’t have experience of how it works in the long run.